This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Thickness: FrameShop Box Editor
- dani.simmonds
Box Thickness | |
|---|---|
Enter the thickness for the material the box is being cut from in the Thickness field. This field also controls which Creasing Tool is used to create the creases when cutting the box: it uses either the Creasing Tool or the Deboss Tool. The software will also calculate where the fold lines should be based on the thickness and the box template selected. |  Box Material Thickness Field |
Select this topic to see information on thicknesses of 3/32” and below which will use the Deboss cartridge to create fold lines when cutting. |  Box Material Thickness for Deboss |
Select this topic to see information on thicknesses of 1/8” and above which will use the Crease cartridge to create fold lines when cutting. | |