This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Thickness: Deboss: FrameShop Box Editor
- dani.simmonds
Thickness: Deboss | |
|---|---|
Enter the thickness for the material the box is being cut from in the Thickness field. For thicknesses of 3/32" and below, it will use the Deboss Cartridge to create the fold lines when cutting the box. The software will also calculate where the fold lines should be based on the thickness and the box template selected. |  Box Material Thickness for the Deboss Tool |
Override Thickness Auto-Adjust | |
|---|---|
Optionally, click the Override Thickness Auto-Adjust checkbox to retain the currently selected tool regardless of the thickness value entered. |  Deboss Thickness Override |