Use the Rotate Mat 90 Degrees toggle to rotate the current design 90° clockwise for the CMC Z1, Z (9000z), 9000, and 8000.

Click the Rotate Mat 90° toggle to Off to display the mat at the original orientation.

Have the Rotate Mat 90° toggled Off.

The design displayed at the original orientation.

Click the Rotate Mat 90° toggle to On to rotate the current design clockwise by 90°.

Click the Rotate Mat 90° toggle to On to rotate the current design clockwise by 90°. 

This is useful when cutting a "too-tall" mat on the CMC in order to rotate it to cut it horizontally.

Note: If cutting from the front, the design will rotate 90° counter-clockwise.

If your design doesn't fit on the mat, check the Sheet Size entered. 

Enter the Sheet Size of matboard (e.g. 40 x 32) to be used for the design on the Setup Tab. 

This will affect the number of rows and columns used in a tiled layout.