This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Options Menu: FrameShop Main Screen

The Options Menu contains a variety of global commands.

  • Trace: Click Trace to open up the Trace and draw software.

  • Nesting: Click Nesting to open up the Nesting software which allows you to nest smaller designs inside larger ones.

  • Box Designs: Click Box Designs to open the Box software to create a custom box.

  • Reset Motors: Click Reset Motors to disengage the power for the head motors.

  • Recent Cuts: Click Recent Cuts to see the list of the recently cut mats.

  • Configurations: Click Configurations to go to the Configurations software to adjust how the CMC cuts or applies the non-bladed cartridges.

  • Application Defaults: Click Application Defaults to set the desired defaults for the FrameShop software. 

  • View License: Click View License to open up the License screen to see information about your software license.

  • Check for Update: Click Check for Update to see if there is an Update available for the FrameShop software.

  • Reload Products F5: Click Reload Products or hit F5 on the keyboard to reload the Product data from the vendors selected in the Subscription screen.

  • Webstore: Click Webstore to visit the Wizard Webstore where you can purchase blades and other items.

  • No labels