">

Skip to end of banner Go to start of banner

Width Adjustment

Skip to end of metadata

Created by dani.simmonds , last modified on Jan 20, 2025

Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Width Adjustment for V-Grooves

The Width Adjustment controls the Width of the V-Groove Lines.
- If V-Groove cuts Too Thin, Increase the Width Adjustment.
- If V-Groove cuts Too Wide, Decrease the Width Adjustment.

🛠️ Click the Minus [-] or Plus [+] button in the desired field several times, perform a test cut, and continue adjusting until satisfied.

No labels