">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 6 Current »

How to Place a V-Groove on a Lower Layer

  • Traditionally, a V-Groove is always placed on the top layer.

  • Now with the introduction of the #112: Ornamental template, you can now place a V-Groove on a lower layer.

VGLowerLayerVGDoneExample800.png

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • On the Openings Tab, bring the template #112: Ornamental onto the Editor.

VGLowerStart800.png

  • Click on the Properties Tab.

  • Enter the desired size for the Ornamental opening and any other adjustments you wish to make.

VGLowerSize800.png

  • Under Number of Layers, set the desired number of layers.

  • For this example, we used 5 Layers.

VGLowerSizeLayerNumbers800.png

  • We are going to place the V-Groove in the middle layer, but first we’re going to give it some space.

  • Change the Reveal for Layer 3 and 4 to .4375.

VGLowerReveals800.png

  • Now we’re going to change Layer 3 to a V-Groove.

  • Click on the Reveal Type button and select the V-Groove.

    • Reveal Types are Normal, Reverse, and V-Groove.

VGLowerVG800.png

  • Layer 3 is now a V-Groove.

VGLowerLayerVGDone800.png

  • Note also that you can select different templates for each layer as you can with the Mixed template.

VGLowerLayerTemplate800.png
  • No labels