Trace Vectorize

Vectorize

The Vectorize button will convert the Rastor Image into Vector Lines, Arcs and Curves with the currently selected settings.
If the image is large or extremely complex, it may take a while for the vectorization process to complete.

Raster

A Raster is a Bitmap image (JPEG, PNG, GIF, etc.) that is made up of a grid of Pixels, such as a photograph or digital image.
- Full Definition: Raster Definition

Vector

A Vector is a graphic drawing in Trace that contains Paths, which are defined by a Start and End points and may contain other Points, Curves, and Angles.
- Full Definition: Vector Definition

Raster to Vector

Raster to Vector is the process of taking a Raster image and converting it into a Vector in order to edit in in the Design Editor and Trace.
- Full Definition: Raster to Vector Definition

Vectorizing the Current Image
Load the Desired Image Load the desired image on the Editor, either by Taking a Picture or Loading an Image File.
Enter the desired size in the Design Bounds field. Design Bounds Definition The Design Bounds defines the work space size of the current design in Trace. Full Definition: Design Bounds Definition
Click the Vectorize button.
The Image is Vectorized and automatically traced as a Normal Bevel if the object is enclosed. You have the option of retracing as a different Bevel/Cartridge Type, or Exploding it and Editing it. Explode Tool Definition The Explode button will break up the selected object into the individual segments that make up the object in Trace. Full Definition: Explode Tool Definition

The Tracing program has to determine which features of the image are Relevant and which are Artifacts.
In the first step, the bitmap is broken down into a number of Paths, which form the boundaries between black and white areas.
In the second step, each path is approximated by an Optimal Polygon.
In the third step, each polygon is transformed into a Smooth Outline.
In the fourth step, the resulting curve is optimized by Joining Consecutive Bezier Curve Segments together where possible.
Finally, the Output is generated in the required format.

Traced

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.
The Set Bevels Tab in Trace contains the tools needed to Trace the design.