">

Skip to end of banner Go to start of banner

Quick Calibration Exterior Backup

Skip to end of metadata

Created by dani.simmonds , last modified on Oct 29, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Quick Calibration Exterior Backup

Contents:

If the Exterior Backup is leaving a Hook in the corner, Increase the Exterior Backup.
If the Exterior Backup is cut Too Long, Decrease the Exterior Backup.
If the Exterior Backup is cut Too Short, Increase the Exterior Backup.

The Exterior Backup on the Opening adjusts the Blade’s Plunge (Backup) into the Matboard (Exterior).
- If the Exterior Backup leaves Hooks in the corner, Increase the Exterior Backup.
- If the Exterior Backup cuts Too Long, Decrease the Exterior Backup.
- If the Exterior Backup cuts Too Short, Increase the Exterior Backup.

Full Definition: Exterior Backup Definition

🛠️ Click the Plus/Minus button in the desired field several times, perform a test cut, and continue adjusting until satisfied.

No labels