">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 30 Current »

  • The 45° Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°, thereby slanting the bevel away from the fallout surface, displaying the matboard core from the front.

    • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    • The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove.

      • However, it cannot be chosen as a standalone bevel type within the Design Editor.

  • The Black 45° Blade Cartridge is labeled “45” with a 45° Angle Symbol on the Cartridge end.

  • The 45° Blade Cartridge does not support Blade Depths above 16.

  • Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type Dropdown Control to edit this configuration.

45MetalBevelDrop70800.pngEnd45Cartridge70800.png
  • No labels