">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 18 Next »

Change to the Debossing Tool Cartridge

  • The Deboss tool cartridges are labeled with the Deboss symbol on the end.  

    • The white Thin Deboss Cartridge is labeled with a Deboss symbol on the end.

    • The red Medium Deboss Cartridge is labeled with a Deboss symbol on the end.

    • The blue Wide Deboss Cartridge is labeled with a Deboss symbol on the end.

EndDebossCartridges70800.png

  • Push blade cartridge release down to eject the current blade cartridge.

  • Turn the new cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head, until it clicks into place. It can only be inserted one way.

  • All of the Deboss tool cartridges are installed in the same manner.

  • No labels