You are viewing an old version of this content. View the current version.
Compare with Current View Version History
« Previous Version 21 Next »
The 45° Front Blade Cartridge is used to cut from the front of the mat.
The 45° Front Blade Cartridge is not selected within the Editor; it is set by using Cut From Front on the Cut Preview.
Lets first set the default settings for the 45 Degree Front Blade Cartridge.
Click on the Admin button in the Admin section of the Main Screen.
Click on the Cutting tab to open the Cutting section.
Select Change to 45° Front Blade to default to using the 45° Front Blade Cartridge when cutting a design from the front of the mat.
Click Save.
It will now use the 45° Front Blade Cartridge when you are cutting from the front.
Cut from Front: Cutting Default Setting
Cut From Front Blade Cartridge Selection: Cutting Default Setting
