You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 60 Current »
If the Non-Blade Tool is too Deep, Decrease the Depth Setting.
If the Non-Blade Tool is too Shallow, Increase the Depth Setting.
The Depth Setting controls the Blade Depth for the Non-Blade Tools in the Configurations.
First make sure that the physical Blade Depth setting is set correctly.
If Non-Blade Line is Too Deep, Decrease the /wiki/spaces/FrameShop8x/pages/1942502735.
If Non-Blade Line is Too Shallow, Increase the /wiki/spaces/FrameShop8x/pages/1942502735.
