">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

  • The Line tool in Trace will draw a Two-Point Line. 

  • The Line is defined by two points:

    • Initial Position (called an Anchor) and the

    • Terminating Position (called an Anchor).

  • After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.

    • Left-Click sets the Point under the Cursor.

    • Right-Click Snaps to the nearest Point.

    • Hold down the CTRL key to draw in Ortho Mode; i.e., Horizontally/Vertically only.

  • No labels