">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 16 Next »

  • The Line tool in Trace will draw a Two-Point Line. 

  • The Line is defined by two points:

    • Initial Position (called an Anchor) and the

    • Terminating Position (called an Anchor).

  • After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.

    • Left-Click sets the Point under the Cursor.

    • Right-Click Snaps to the nearest Point.

    • Hold down the CTRL key to draw in Ortho Mode; i.e., Horizontally/Vertically only.

  • No labels