Skip to end of metadata
Go to start of metadata
You are viewing an old version of this content. View the current version.
Compare with Current
View Version History
« Previous
Version 15
Next »
The Line tool in Trace will draw a Two-Point Line. The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor). After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc. Left-Click sets the Point under the Cursor. Right-Click Snaps to the nearest Point. Hold down the CTRL key to draw in Ortho Mode; i.e., Horizontally/Vertically only.
|  |