">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Adding a Deboss With an Object Selected

  • Click the object you want the Deboss placed around.

  • Click Add Decorative Line on the Openings tab.

  • Select the desired Deboss Cartridge Size.

    • Deboss Wide

    • Deboss Medium

    • Deboss Thin

Deboss Cartridge

  • The Deboss Cartridge stylus presses onto the surface of the matboard to create a subtle design.

  • There are three Deboss Cartridge sizes with a Deboss Symbol on the Cartridge end: Thin, Medium, Wide.

DebossingImagesCartridges70800.png

Full Definition: Deboss Cartridge Definition

  • The Deboss Offset window will open.

  • Enter the Offset Distance from the selected opening to place the Deboss.

  • Click OK.

  • The Deboss is placed around the opening at the offset distance specified.

  • For Additional Information: See the Deboss Properties to edit the individual proprietary adjustments available for the Deboss. 

  • No labels