">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 4 Next »

Tiling: Spacing: Setup Tab

  • Click on the original design to select it.

  • Enter the amount of spacing between each mat to be cut in the Spacing field.

  • The spacing entered will be placed between each mat.

  • Entering Zero (0) will only only cut the Shared Edge between the mats rather than cutting the outside of each mat.

  • Any number above Zero (0) will cut out the outside of each mat separately.

 Shared Edge Definition

The Shared Edge function will cut the Shared Edges of the Tiled Outside Cuts on the CMC Z1 and Z (9000z) as one stroke between the designs, instead of cutting the outside of each mat individually.

See: Shared Edge Cut Mode Function

  • No labels