">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 64 Next »

V-Groove Properties

  • A V-Groove is a decorative channel cut about halfway through the thickness of the matboard, exposing the matboard core.

  • Click on the V-Groove to select it and click on the Properties Tab to edit it.

    • Optionally, Right-Click on the V-Groove and select Properties to open the V-Groove Properties.

  • Use V-Groove Properties to edit the individual proprietary adjustments available for the V-Groove.

Contents:

 V-Groove Definition

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

45VGroove70800.pngBevelType45VGSelect70800.jpg

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations

PropertiesVGoove70800.png
  • No labels