">

Click here to check out our new How To section">Click here to check out our new How To section

Skip to end of banner Go to start of banner

Plunge Count Number Field: Configurations Screen

Skip to end of metadata

Created by dani.simmonds, last modified on Oct 17, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Setting the Plunge Count: Configurations Screen

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.
- In this example, the 45 Degree Cartridge Plunge Count has been set to Forty plunges.

Enter the desired Plunge Count value for each Blade Cartridge..
Toggle the Plunge Count to On in the Cut Preview.

For Additional Information:
Enable Plunge Counts Options Menu: Cut Preview
Plunge Count Toggle: Cut Preview Options

After the specified number of plunges, the system will pause and will prompt for a Blade Change.

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.
Enter the Plunge Count value for each Blade Cartridge and select Plunge Count on the Cut Preview.

Full Definition: Plunge Count Definition

No labels