">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 47 Next »

45 Degree Cartridge

  • The 45 Degree Cartridge cuts a 45° bevel into the matboard.   

Contents:

  • The 45° Cartridge cuts the bevel angle on the matboard at 45°.

  • This angle is displayed on the Front or the Back of the mat depending upon the selected Bevel Type.

  • The 45° Blade Cartridge does not support Blade Depths above 16.

45MetalBevelOpeningCartridge70800.png

Full Definition: 45 Degree Cartridge Definition

  • No labels