You are viewing an old version of this content. View the current version.
Compare with Current View Version History
« Previous Version 51 Next »
The Non-Blade Tool Tears the Corners, Increase the Corner Pause.
The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause.
Select desired Cartridge Tab.
Select the desired Bevel Type from Current Bevel Type.
Edit the desired Configuration field.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.