You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 21 Next »
The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges, viewed as cut.
If the Opening is cut Too Far Up Vertically, Decrease the Vertical Home.
If the Opening is cut Too Far Down Vertically, Increase the Vertical Home.
See Also: Vertical Adjustment for Non-Blade Cartridges Definition
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.