">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

  • The Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior Cuts of objects.

  • The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

 How to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • The Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior Cuts of objects.

  • The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  
  • No labels