Pen: Adding a Pen With an Object Selected

Adding a Pen With an Object Selected
Click the object you want the Pen placed around. Click Add Decorative Line button on the Openings tab. Select the desired Pen Number. There are nine Pens available. For Additional Information: See Install Pen for information on calibrating each of the pens for use in the Pen Cartridge. Default Settings: Pen: Editor Default Setting Install Pen Definition The Install Pen Utility calibrates the Pen Tool for use on the CMC. The Pen Cartridge draws onto the surface of the matboard to create a design. In addition to templates, you can also Pen CutArts, LetterMats and TTFs. Use the Install Pen utility to calibrate the system for different Pens. See: Install Pen: Set the Pen Depth Setting for CMC Z1 See: Install Pen: Set the Pen Depth Setting for CMC Z (9000z) and 9000
The Pen Offset window will open. Enter the Offset Distance from the selected opening to place the Pen. Click OK. Default Settings: V-Groove Distance: Editor Default Setting for Pen Distance under V-Groove Distance.
The Pen is placed around the opening at the offset distance specified. For Additional Information: See Pen Properties to edit the individual proprietary adjustments available for the Pen.

Search