">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Cut From Back: Cut From Front Toggle Off

  • Use the Cut from Front toggle to select whether you want to cut from the Front or the Back of the mat.

  • Click the Cut From Front toggle to Off to cut the current layer from the Back of the mat. 

  • The Cut Preview will now cut from the back.

  • The Cut Preview Indicator will display Back.

  • Mats containing elements that are administered to the Front of the mat (i.e., Deboss, Pen, V-Grooves, etc.,) will still force it to cut from the Front. 

  • The elements will be applied to the Front of the mat, and any Openings on that layer will also cut from the Front of the mat.

 Cut From Back Definition

Cutting from the Back will cut with the back of the mat toward the operator, and can be selected on the Cut Preview.

  • On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner:

    • Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel.

    • Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat.

    • V-Grooves have their own selection on the list.

If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat.

So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening. 

  • No labels