Width of an Open V-Groove | |
|---|---|
The Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart. Both the matboard core and the lower layer matboard are visible from the front. First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop*. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening. *The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer. Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration. Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration. See: 45 Degree Normal Bevel Drop Configurations See: 45 Degree Normal Bevel Opening Configurations See: 45 Degree Plus Normal Bevel Drop Configurations See: 45 Degree Plus Normal Bevel Opening Configurations See: 45 Degree Front Normal Bevel Drop Configurations See: 45 Degree Front Normal Bevel Opening Configurations The Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard color is visible from the front. First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop*. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening. *The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer. Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration. Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration. See: 45 Degree Reverse Bevel Drop Configurations See: 45 Degree Reverse Bevel Opening Configurations See: 45 Degree Plus Reverse Bevel Drop Configurations See: 45 Degree Plus Reverse Bevel Opening Configurations See: 45 Degree Front Reverse Bevel Drop Configurations See: 45 Degree Front Reverse Bevel Opening Configurations |   |