">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Outside Size

  • If the outside dimension is not specified, it will use the Dynamic Outsides to set the outside of the mat. 

  • Enter the outside dimension, if desired. 

  • Enter the Outside Width, if desired.

  • Enter the Outside Height, if desired.

  • Default Settings: See Admin > Defaults to set the default for displaying the Opening Size First or the Outside Size First on the New Openings Screen.

 Outside Bevel Definition

The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Outside Configurations

See: 45 Degree Plus Outside Configurations

See: 45 Degree Front Outside Configurations

See: 52 Degree Outside Configurations

See: 90 Degree Outside Configurations

 Sizes Button Definition

The Sizes Button displays the Recent and Standard sizes. 

Recent lists the last ten sizes entered.

Standard lists Standard sizes associated with the current unit of measurement.

 Swap Button Definition

The Swap Button switches the values between the width and height fields.

 Dynamic Outsides Definition

The Dynamic Outsides feature adds the Border Size to the Bounding Rectangle of the current Group of Openings, adjusting the Outside Size as necessary in Designer and Visualize.

See Also: Dynamic Outsides Function in Trace

See Also: Dynamic Outsides Function in Visualization

  • No labels