">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Crease Distance

  • Set the Distance between the Crease and the object it is Attach To. 

  • Select the Crease.

  • Select the opening or mat from the Attach To dropdown control. See Attach To below.

  • Enter the Distance to place the Crease from the object it is attached to.

  • The Crease will resize around the object by the distance entered.

  • Resizing the object the Crease is attached to will resize the Crease to remain the distance entered in the Distance field.

  • If the Crease is Not Attached to anything, the Distance field is grayed out. 

  • Offsetting the Crease from an object when initially placing the Crease does not automatically attach the Crease to that object.

  • Default Settings: See Admin > Editor for the default settings for the default Deboss/Pen/V-Groove/Crease Distance under V-Groove Distance.

  • Changing the Distance will readjust the distance the Crease is placed from the object it is Attached To. 

  • Resizing the object the Crease is Attached To will resize the Crease to remain the distance entered in the Distance field.

 Attached To Definition

The Attach To function in Designer will connect the selected Element (V-Groove, Deboss, Pen, Vinyl or Crease) to the Mat or a specific Opening at the Distance specified.

If the Mat/Opening is moved/resized, the Element (V-Groove, Deboss, Pen, Vinyl or Crease) will automatically move and resize in relationship to the Mat/Opening at the distance specified.

See: Attach To Default Setting

See: V-Groove Properties

See: Deboss Properties

See: Pen Properties

See: Vinyl Properties

See: Crease Properties

  • No labels