">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

How to Change the Blade Cartridge Type for an Opening

  • These instructions will show you how to change the Blade Cartridge Type for an opening.

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • On the Openings Tab, bring the template #101: Rectangle template onto the Editor.

  • Click on the Properties Tab to edit it.

  • Enter the desired size for the #101: Rectangle opening.

CartridgeTypeSize800.png

  • On the Template Options Reveal Tab, locate the Cartridge and Type section.

  • Click on the Cartridge Icon. 

  • Select the desired Blade Cartridge Type for the current layer of the selected template.

  • NOTE: The 45°+ Cartridge and the 45° Front Cartridge are not selectable from this screen.

    • The 45°+ Cartridge is selected on the Cut Preview Screen by selecting a Blade Depth above 16.

    • The 45° Front Cartridge is selected on the Cut Preview Screen by selecting Options > Cut From Front Tool > Switch Between Front and Normal Tools and selecting to Cut From the Front of the mat.

CartridgeTypeSelectCart800.png

  • In this example, the Top Layer will now cut with the 90° Cartridge.

CartridgeTypeSelected90800.png
  • No labels