You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 8 Current »
These instructions will show you how to Merge several objects together to make a new shape.
To keep it simple, we will be using Guide Lines to create an opening for a Newspaper clipping.
Remember that to Merge, you can use any Template or CutArt as long as they share the same Bevel Type.
Click New Mat Design on the FrameShop Main Page.
Click Cancel on the New Openings Screen.
On the Openings Tab, bring the template #101: Rectangle template onto the Editor.
Click on the Properties Tab to edit it.
Enter the desired size for the #101: Rectangle.
Bring over a second #101: Rectangle.
Size this second #101: Rectangle to the desired size.
Note: We will be overlapping this new Rectangle Horizontally with the original Rectangle by .25, so we will make the Width .25 larger to compensate.
Now we will place some Guide Lines from our original opening so that we can place the new opening into the correct position.
Make sure the Positioning toggle is set to Bottom Layer.
Right-Click on the original opening and select New Guide From Other.
The New Guide From Other screen opens.
We want a Vertical Guide placed .25” into the opening, so enter -.25 for the Distance From Left field.
We want a Horizontal Guide placed .5” into the opening, so enter -.5 for the Distance From Top field.
Click OK to place the Guides.
Negative numbers will place the Guide inside the selected object.
Positive numbers will place the Guide outside the selected object.
The new Guides have been placed on the opening.
Move the new Opening so that it Snaps to the Horizontal and Vertical Guide Lines.
The opening has been placed.
Select both openings (Ctrl+A) and click the Group Selection button.
The openings will Merge together where they overlap.
Using these instructions, you can merge several other openings to the design, with or without Guides as desired.
