">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

How to Make an Isosceles Using the #507: Pennant

  • These instructions will walk you through making an Isosceles using the #507: Pennant template.

IsoscelesDone800.png

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • On the Openings Tab, bring the template #507: Pennant template onto the Editor.

  • Click on the Properties Tab to edit it.

  • Enter the desired size for the #507: Pennant opening.

IsoscelesSize800.png

  • Click on the Parameters tab.

  • We will be designing the shape sideways and then rotating it.

  • Change the Parameters as desired.

  • For this example we changed:

    • Tail is 0

    • Taper is 1.25.

IsoscelesParams800.png

  • Rotate the opening to the desired orientation.

IsoscelesRotate800.png

  • Our Isosceles design is now completed.

IsoscelesDone800.png
  • No labels