How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

How to Place a V-Groove or Deboss Line on a Lower Layer

  • Traditionally, a V-Groove or Deboss line is always placed on the top layer.

  • Now with the introduction of the #112: Ornamental template, you can now place a V-Groove or Deboss line on a lower layer.

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • On the Openings Tab, bring the template #112: Ornamental onto the Editor.

  • Click on the Properties Tab to edit it.

VGLowerStart800.png

  • Click on the Properties Tab.

  • Enter the desired size for the Ornamental opening and any other adjustments you wish to make.

VGLowerSize800.png

  • Under Number of Layers, set the desired number of layers.

  • For this example, we used 5 Layers.

VGLowerSizeLayerNumbers800.png

  • We are going to place the V-Groove in the middle layer, but first we’re going to give it some space.

  • Change the Reveal for Layer 3 and 4 to .4375.

VGLowerReveals800.png

  • Now we’re going to change Layer 3 to a V-Groove.

  • Click on the Reveal Type button and select the V-Groove.

    • Reveal Types are Normal, Reverse, and V-Groove.

VGLowerVG800.png

  • Layer 3 is now a V-Groove.

VGLowerLayerVGDone800.png

  • Note also that you can select different templates for each layer as you can with the Mixed template.

  • No labels