How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 57 Current »

Swoop Definition

  • A Swoop in an Opening is where the corners Curve Inward toward the Opening.

    • If the Opening has a Swoop, Increase the Rotation.

 Swoop General Definition

A Swoop is where the corners Curve Inward toward the object.

If the object has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares/wiki/spaces/FrameShop8x/pages/1942511158in objects.

See: Rotation Configurations

 Swoop on Opening Definition

A Swoop in an Opening is where the corners Curve Inward toward the opening.

If the Opening has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares in Openings.

See: Rotation Configurations

 Swoop on Drops Definition

A Swoop in a Drop is where the corners Curve Inward toward the drop.

If the Drop has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares in Openings.

See: Rotation Configurations

 Swoop on the Outside Definition

A Swoop in a Outside is where the corners Curve Inward toward the outside.

If the Outside has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares in Openings.

See: Rotation Configurations

 Outside Rotation on V-Groove General Definition

The Outside Rotation controls for Swoops and Flares in the Outside Cut of the V-Grooves.

 Inside Rotation on V-Groove General Definition

The Inside Rotation controls for Swoops and Flares on the Inside Cut of the V-Grooves.

 Outside V-Groove Swoop Definition

A Swoop in the Outside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

The Outside Rotation controls for Swoops and Flares in the Outside Cut of the V-Grooves.

See: Outside Rotation Configurations

 Inside V-Groove Swoop Definition

A Swoop on the Inside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

The Inside Rotation controls for Swoops and Flares on the Inside Cut of the V-Grooves.

See: Inside Rotation Configurations

 Swoop in Crease Definition

A Swoop in a Crease is where the corners Curve Inward toward the Crease.

If the Crease has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares in Openings.

See: Rotation Configurations

 How to Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels