How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

Vinyl Tool Cartridge: Cartridge Manual: CMC Z1, Z(9000z), and 9000

  • The Vinyl Cartridge uses a special blade to cut the Vinyl which has been temporarily adhered to matboard to create the design.

  • The following are instructions to help get started using the Vinyl Tool. The Vinyl Tool kit comes with the cutting tool itself along with sample sheets of vinyl and other accessories used to cut designs.

Contents:

Vinyl Product Part Numbers

30-34100-2 Vinyl Cutter Cartridge Package     
30-34090-1 Vinyl Cutter Hardware        
30-34094-1 Vinyl Cutter Tool Assembly
   30-34099-2 Vinyl Cutter Tool Kit which contains:    
          20-34078-1 Clear Transfer Tape (2.5 foot sheet)    
          20-34079-1 Vinyl Sheet - Silver (2.5 foot sheet)    
          20-34081-1 Vinyl Sheet - Diamond Etch (2.5 foot sheet)
          20-34098-1 Vinyl Sheet - Matte White (2.5 foot sheet)
          20-34099-1 Vinyl Sheet - Matte Black (2.5 foot sheet)    
          20-34082-1 Squeegee        
          20-34083-1 Repositionable Glue Stick        
          20-34084-1 Embossing Tool Set
20-34086-1 Vinyl Tool Replacement Blades (5 blades)
20-34085-1 Vinyl Tool Manual

  • No labels