">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

45°+ Normal Bevel Opening Definition

  • The 45°+ Normal Bevel Opening is created by cutting into the thicker matboard surface with the blade angled at 45°, thereby slanting the bevel away from the matboard surface.

  • The matboard core is visible from the front.

  • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

  • The Bevel Type determines the initial blade plunge position.

 45°+ Normal Bevel Opening Full Definition

The 45°+ Normal Bevel Opening is created by cutting into the thicker matboard surface with the blade angled at 45°, thereby slanting the bevel away from the matboard surface. The matboard core is visible from the front. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Plus Normal Bevel Opening Configurations

 How to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels