How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

90° Bevel Outside Definition

  • The 90° Bevel Outside is created by cutting a 90° Right Angle into the matboard.

  • The matboard core is hidden from view since there is no Bevel cut when cutting at a 90° Angle.

  • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

  • The Bevel Type determines the initial blade plunge position.

 90° Bevel Outside Full Definition

The 90° Bevel Outside is created by cutting a 90° Right Angle into the matboard.

The matboard core is hidden from view since there is no Bevel cut when cutting at a 90° Angle.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 90 Degree Bevel Outside Configurations

 How to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels