">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 39 Next »

V-Groove Flare Definition

  • A Flare in the inside or outside cut of the V-Groove is where the corners Curve Away from the opening.

 V-Groove Flare General Definition

A Flare in a V-Groove is where the corners Curve Away from either the Outside or Inside Cut of the V-Groove.

If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

See: Rotation on V-Grooves Configurations

 Outside V-Groove Flare Definition

A Flare in the outside cut of the V-Groove is where the corners Curve Away from the opening on the Outside cut of the V-Groove.

If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

See: Outside Rotation for V-Grooves Configurations

 Inside V-Groove Flare Definition

A Flare on the inside cut of the V-Groove is where the corners Curve Away from the opening on the Inside cut of the V-Groove.

If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

See: Inside Rotation for V-Grooves Configurations

 How to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels