">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 47 Next »

Editing the Plunge

  • The Non-Blade Tool leaves a Dot where it plunges, unselect select Plunge.

  • The Non-Blade Tool takes Too Long to apply, select Plunge.

 How to Select the Bevel Type to Edit

Select desired /wiki/spaces/FrameShop8x/pages/1942492338. 

Select the desired Bevel Type from /wiki/spaces/FrameShop8x/pages/1942498835.

Edit the desired Configuration field.

Select Plunge

  • The Non-Blade Tool takes Too Long to apply, select Plunge.

 Plunge Full Definition

The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.

The Non-Blade Tool takes Too Long to apply, select Plunge.

This is different from the /wiki/spaces/FrameShop8x/pages/1942498367 which controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

ToolPlungeExtended70800.png

Unselect Plunge

  • The Non-Blade Tool leaves a Dot where it plunges, unselect Plunge.

 Plunge Full Definition

The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.

The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.

This is different from the Plunge Count which controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

ToolPlungeExtended70800.png
  • No labels