Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 46 Next »

  • Debris has a chance to build up behind the Air Clamp on the CMC 5000, 8000 and 8500 models. The debris will bow the Air Clamp out into the rail. This is apparent if the customer places a piece of matboard into the lower rail and slides it to the left, and it begins to bind up.

  • Remove the Air Clamp Rail.

  • Clean out the debris.

  • Never use sharp instruments to clean out the Clamps or the Rails.

  • Replace the Air Clamp and the Air Clamp Rail.

  • No labels