Skip to end of banner Go to start of banner

Changing the Blade: CMC 8000+, Z1, 8000RC, Z(9000z), 9000, 8500eSBT, 8500e, 8500 and 8000

Skip to end of metadata

Created by dani.simmonds, last modified on May 21, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Changing the Blade

The Changing the Blade section gives information on changing the blades for the CMC 8000+, Z1, 8000RC, Z(9000z), 9000, 8500eSBT, 8500e, 8500 and 8000 cartridges.
If there is any side-to-side movement of the blade in the blade cartridge, or if chunks have been cut out of the blade cartridge, then it is time to replace the blade cartridge.

For Additional Information: For changing the cartridges in the head, see Cartridges: Changing the Cartridges in the CMC Z1, Z(9000z), 9000, 8500eSBT, 8500e, 8500, 8000, 8000RC and 8000+.

Contents:

No labels