You are viewing an old version of this content. View the current version.
Compare with Current View Version History
« Previous Version 15 Next »
The Clam Shell Box consists of a base and a separate lid.
The base and lid can be cut separately.
Cut out the top and bottom of the box at the desired dimension.
Fold the box sections along the creased edges.
Fold in the inner flaps of the box and hot glue into place.
Fold over all of the other inner flaps of the box and hot glue into place.
Repeat the steps with the other box section.
Place the box top over the box bottom. The box is complete.
