How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 40 Next »

Add CutArt

  • Click Add CutArt on the Openings tab. 

 CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

See: Add CutArt Function

  • The Browse screen opens.

  • Select the desired CutArt from the thumbnails displayed. 

  • Click Design.

  • For Additional Information: See Add Location under Browse for instructions on locating CutArt from other locations.

CutArtLoadBrowseEdit70800.png

  • The CutArt is placed on the Editor.

  • For Additional Information: See CutArt Properties for information on editing the individual proprietary adjustments available for CutArt. 

Add CutArt Dropdown Control

  • Click the Add CutArt dropdown control on the Openings tab to add a recently used CutArt to the design.

  • The recently placed CutArts will be listed.

  • Click on the desired CutArt to place it on the Editor.

  • The CutArt is placed on the Editor.

  • For Additional Information: See CutArt Properties for information on editing the individual proprietary adjustments available for CutArt. 

  • No labels