How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 39 Next »

Add Deboss Opening

  • The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

 Deboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

DebossWideCartridgeConfig70800.jpg

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

  • The Deboss is placed on the Editor.

  • For Additional Information: See the Deboss Properties to edit the individual proprietary adjustments available for the Deboss. 

Adding a Deboss With an Object Selected

  • Click the object you want the Deboss placed around.

  • Click Add Decorative Line on the Openings tab.

  • Select the desired Deboss Cartridge Size.

    • Deboss Wide

    • Deboss Medium

    • Deboss Thin

  • The Deboss Offset window will open.

  • Enter the Offset Distance from the selected opening to place the Deboss.

  • Click OK.

  • Default Settings: See Admin > Editor for the default settings for the default Deboss/Pen/V-Groove Distance.

  • The Deboss is placed around the opening at the offset distance specified.

  • For Additional Information: See the Deboss Properties to edit the individual proprietary adjustments available for the Deboss. 

  • No labels