">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 31 Next »

Selecting the 45° Blade Cartridge

  • The 45° blade cartridge is the default blade cartridge.

    • The 45° blade cartridge does not support blade depths above 16.

  • Click on the opening.

  • Click on the Properties Tab.

  • Click the Cartridge Icon on the desired layer.

Template Object

  • Select the 45° Bevel Cartridge.

  • Only the blade cartridges that can be used on Templates are the 45°, 52° and 90° cartridge.

 Template Definition

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

See: Template Properties

See: Template Library

Non-Template Object

  • Select the 45° Bevel Cartridge.

  • If the selected object is a non-template, all of the licensed applicable cartridges will be displayed.

    • The cartridges not available in the current scenario are either grayed out or not displayed.

 Non Template Definition

Non-Template Objects can include CutArt, LetterMat, TTFs and Boxes.

Each of these items have their own specialized shape generators and Parameters that can be adjusted.

New Cartridge Selected

  • The current layer displays the selected cartridge.

Go to the Cut Preview

  • No labels