">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 60 Next »

Backup on Creases

  • If the Backup is Too Long, Decrease the Backup.

  • If the Backup is Too Short, Increase the Backup.

 How to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

 How to Adjust the Exterior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Crease Exterior Backup Too Long

  • If the Backup is Too Long, Decrease the Backup.

 Backup on Crease Definition

The Backup controls where the cartridge Plunges into the Matboard. 

If the Backup is Too Long, Decrease the Backup.

The Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.

See: Backup on Creases in Configurations

 How to Adjust the Exterior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Crease Exterior Backup Too Short

  • If the Backup is Too Short, Increase the Backup.

 Backup on Crease Definition

The Backup controls where the cartridge Plunges into the Matboard. 

If the Backup is Too Short, Increase the Backup.

The Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.

See: Backup on Creases in Configurations

 How to Adjust the Exterior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels