Straight Line Trimmer Installation

NOTE: A Blade has been installed, so take care when handling the Straight Line Trimmer.

Look at the backside of the Trimmer and locate the T-Nut on the glides. Make sure that the T-Nut lines up with the glide on both the upper and lower sections of the Trimmer.

Holding the Straight Line Trimmer steady (a second person helps here), carefully slide the Trimmer onto the channels on the right side of the Board, making sure that the T-Nuts slide into the channel of both the upper and lower rails.

Move the Straight Line Trimmer to the right until it stops.

Slowly tighten the bottom locking knob COUNTER-CLOCKWISE until it is snug.

Slowly tighten the top locking knob CLOCKWISE until it is snug. You will calibrate it after the air lines are hooked up.