Unidirectional Cut Pattern

Cut Pattern: Unidirectional
Set Unidirectional from the Cut Pattern dropdown control to cut Tiled mats in One Direction only on the CMC Z1, Z(9000z), 9000 and 8000+. Click the Set Advanced Options button to access the Advanced Outside Options. Click the Set Advanced Options button to access the Advanced Outside Options. For Additional Information: Select Options Menu > Cut Outside to cut the outside of the mat. For Additional Information: See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut. For Additional Information: See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut for the CMC Z1, Z(9000z), 9000 and 8000+. Default Settings: See Admin > Editor for the default settings for Cutting the Outside. Default Settings: See Admin > Cutting for the default settings for the Advanced Options. Default Settings: See Admin > Cutting for the default settings for Tiling. Default Settings: See Admin > Cutting for the default settings for the Cut Mode. Default Settings: See Admin > Cutting for the default settings for 90 Degree Outside.
Select Unidirectional from the Cut Pattern dropdown control. Click OK. This will cut the Outside of Tiled mats in One Direction only. This is useful if you want the Outside cuts of the Tiled mats to be exactly the same size, as the sizes may be off by the thickness of the blade when it's cutting Bi-Directional (two different directions) when cutting the Outside. Default Settings: See Admin > Cutting for the default settings for Tiling.
It will cut the Outsides of Tiled mats in a Unilateral fashion, moving the Head in only One Direction.

Stairstep vs. Optimized vs. Unidirectional
See Stairstep vs. Optimized vs. Unidirectional for information on the outside cutting differences between the different Cut Patterns.

Search

Click here to check out our new How To section">Click here to check out our new How To section

Unidirectional Cut Pattern

Cut Pattern: Unidirectional

Stairstep vs. Optimized vs. Unidirectional