">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 10 Next »

Load File Image

These instructions show how to Load a File Image into the Visualization software.

  • Click the Load File Image button to Load a File Image.

  • The Open File screen opens.

  • Click on the desired Image file.

  • Click Open to open the Image.

  • The Image file is opened into the Editor.

Pixels Per Unit

  • If the image file loaded is a different size than the last file loaded, it will ask you to set the scale using Pixels per the current unit of measurement for the image.

  • If you are using inches, it will be Pixels per Inch.

  • Enter the number of Pixels per Inch and click OK.

  • Optionally, click the Set as Default checkbox to set this size as the default size.

How to Calculate PPI2 or Pixels per Square Inch.

  • Multiply PPI × PPI to get pixels per square inch. The number of pixels in a square inch represents the resolution or pixel density of an area of one square inch. Substitute 1 cm for 1 inch to find pixels per square centimeter or PPcm2.

  • No labels