How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

V-Groove Interior Overcut Definition

  • The V-Groove Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove.

  • The V-Groove Interior Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration.

V-Groove Backup and Overcut Illustration

  • The V-Groove Backups and Overcuts control where the Blade Plunges/Retracts from the Matboard/Fallout on the Exterior/Interior cuts when cutting V-Grooves.

The Backups and Overcuts Fields for V-Grooves Control Specifically Where the Blade Plunges into and Retracts From the Matboard or Fallout

V-Groove Cut Direction and Cut Order

  • The Inside of the V-Groove cuts First in a Clockwise direction. These are Internal cuts, which cut into the V-Groove Fallout.

  • The Outside of the V-Groove cuts Second in a Counter-Clockwise direction. These are External cuts, which cut into the Matboard.

  • No labels