">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 40 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Exterior Backup on Drops Definition

  • The Exterior Backup controls where the blade plunges into the matboard on exterior cuts.

Current Drop Bevel Type

The different Bevel Types, including whether it is cutting from the front or the back of the mat, will determine the direction the head travels as it cuts, and dictates whether the corner is a backup or an overcut.

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat,

  • Reverse Drop-Front of Mat

  • The Exterior Backup is displayed on the Configuration Map and on the associated field as a green arrow. 

Drop Exterior Backup Too Long

Problem:

  • The Exterior Backup is cut too long.

Resolution:

  • Decrease the Exterior Backup.

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Drop Exterior Backup Too Short

Problem:

  • The Exterior Backup is cut too short.

Resolution:

  • Increase the Exterior Backup.

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

  • No labels